CNC machining center has a wide range of applications, it is also a kind of equipment often used in the field of precision machining. When using the machining center, no matter before after use, the corresponding maintenance matters cannot be ignored. Ding ordnance has been engaged in CNC external processing for up to 17 years. Today, I would like to share with you about CNC processing Maintenance knowledge of the center.

1. Before the operation of the processing center, wear all labor protection appliances, conduct lubrication maintenance as required, check the oil level of each lubricating oil.

2. When the workpiece is clamped, it shall be handled with care to prevent bumping damaging the worktable; when the workpiece in the machining center is heavy, the bearing capacity of the worktable of the machine tool shall be verified, the machining center shall be overloaded.

3. The machining program should be checked before running. When using the high-speed function of machining center, the matching of tools should be confirmed.

4. After the machine tool of machining center is started, check whether the movement of spindle workbench in all directions is normal, whether there is abnormal noise, etc.

5. In the process of machining, we should always pay attention to whether the movement machining state of the machine tool are normal , encounter abnormal phenomena. In case of noise alarm, the machine shall be shut down immediately for inspection treatment, the machining can be continued only after the troubleshooting of machining center.

Good maintenance habits periodic inspection can only increase the service life of the machine tool, but also make it maintain good machining accuracy. Therefore, we will maintain maintain the machine tool according to the cycle, which will be easy to process high-precision parts.